Ink accumulation, ink mixing, and ink flow problems2

Aug 15, 2025

Leave a message

Need to know:
Inquire about local temperature and humidity, and observe the temperature and humidity control of customer workshop
ask when it appeared
Ask if there is a problem with a single volume or if multiple volumes have been changed
Ask if it has just been turned on or just printed
Ask whether to replace the ink and whether to shake it well before adding ink

Ask what pattern appears when printing and what color or pattern is most severe

 

Verification method of probable cause:
① Ink settling
Ink settling on printer---ink cycle twice reprint verification
Ink settling in ink bottle---Check if there is any deposition in used ink bottle


① The membrane is damp
Print verification of the film brought with you when changing the roll (confirm that it is not damp)
Scratch the strength of the contrast film coating with the belly of your fingers (after being wet, the strength of the coating generally decreases)
In the case of high customer cooperation, verify which color is not compatible with by typing different color blocks

Photograph the bottle body and bottom of this color ink

 

info-1000-634

info-1000-635

 

Send Inquiry