Printing color difference-color difference on both sides
Aug 30, 2025
Leave a message
Phenomenon:
After printing through the oven, there is a color difference between the two sides and the middle of the film, and there is a color difference between the head and the tail of the tube
After printing through the oven, there is color difference between different rolls
Possible causes in order:
① Print sensitive solid color blocks, such as pink and blue will appear
② Caused by membrane moisture
③ Hansen board, printer head, printing equipment, etc. may all cause this problem
Workaround:
Please use this film to print dark colors, patterns, etc., which can solve the problem of color difference
The feathering is adjusted to 60%-80%, and strip-shaped solid color blocks are printed on that edge of the film
The product should be sealed and packaged. When only half a roll of film is left, it should also be sealed with stretch film. Storage environment: temperature ≤ 35 ℃, humidity 40-60% RH, ventilated storage
Remove the outer ring 5-10m, print again, and observe whether there is still color difference
